DZ-2232 DC Brushless Advertising Barrier Gate: Vehicle Access and Outdoor Advertising in One Solution
An advertising barrier gate combines vehicle access management with an outdoor advertising display. Installed at frequently used vehicle entrances and exits, it controls traffic while turning each vehicle passage into a repeat advertising exposure opportunity.
The DZ-2232, also known as the Big Apple Advertising Barrier, is designed for residential communities, commercial parking lots, office buildings, shopping malls, industrial parks, hotels and similar controlled-access locations. Its integrated format supports day-to-day vehicle management while providing space for property notices, commercial campaigns or media operations.
A Practical Solution for High-Visibility Entrances
Conventional barrier gates focus primarily on traffic control. The DZ-2232 adds a large-format advertising boom, allowing the entrance lane to serve two functions without requiring a separate advertising structure.
This arrangement is particularly useful in locations where vehicles repeatedly pass through the same controlled point. Property managers can maintain organized vehicle access while using the boom for advertising, announcements or other visual communication. For media operators and property management teams, the advertising panel can also support additional revenue opportunities.
Core Product Advantages
Fourth-Generation DC Brushless Core
The DC brushless motor provides low power consumption, low heat generation and a wide speed adjustment range. With no carbon brushes to wear, it offers a longer service life than a conventional brushed drive while supporting smooth boom movement.
Four-Stage Gear Reduction Drive
The oil-free reduction system delivers high torque with low operating noise. Its anti-jamming design supports stable performance, including operation at temperatures as low as -35°C.
Hall Automatic Limit Control
After power-on, the system automatically recognizes the boom position without requiring manual limit adjustment. Constant-force control enables soft starting and stopping for smoother operation.
Curved Three-Linkage Structure
The linkage structure helps address sagging and warping of the advertising boom. It also provides good wind resistance and makes balance calibration more convenient.
Integrated Side-Mounted Core
The modular core simplifies assembly and maintenance. Left- and right-hand operating directions can be interchanged quickly, helping distributors and project contractors reduce stocking complexity.
DC 24V Low-Voltage Controller
The highly integrated main controller uses a DC 24V low-voltage architecture and supports AC 110V/220V, 50/60Hz power input, making the product suitable for domestic and export projects.
Technical Specifications
| Item | Specification |
|---|---|
| Model | DZ-2232 (Big Apple Advertising Barrier) |
| Drive Core | Fourth-generation DC brushless core |
| Cabinet Dimensions | 460 × 380 × 1280 mm |
| Power Supply | DC 24V / AC 110V or 220V, 50/60Hz |
| Rated Power | 350W |
| Adjustable Operating Speed | 6–20 seconds |
| Advertising Boom Length | 3–6 m |
| Working Temperature | -35°C to +85°C |
| Relative Humidity | ≤90% |
| Protection Rating | IP54 |
| Remote-Control Distance | ≤100 m in an open area |
| No-Load Motor Speed | 3000 r/min |
Standard Functions and System Interfaces
The DZ-2232 includes control and interface options for use within a broader parking access solution:
- Adjustable obstacle auto-reverse: the force can be adjusted to support anti-crush protection when resistance is detected.
- Loop detector interface: reserved for connection to a vehicle loop detection system.
- Infrared anti-smash interface: reserved for an infrared safety sensor.
- Traffic-light relay output: supports traffic-light control for clearer vehicle guidance.
- Boom-position signal output: provides a relay signal for monitoring the barrier position.
- RS485 communication: enables connection with license plate recognition and parking management systems.
- Backup battery interface: supports emergency operation during a power failure when used with a suitable backup battery arrangement.
- Breakaway boom protection: the advertising boom can detach if struck by a vehicle, helping reduce damage to the barrier gate and vehicle.
- Traffic-counting signal interface: provides a connection point for vehicle traffic counting.
Application Scenarios
Residential Communities
At community entrances, the barrier controls resident and visitor vehicle access. The advertising boom can carry property notices, service information or commercial advertising.
Commercial Plazas and Shopping Malls
Parking entrances provide repeated exposure to arriving and departing customers. The boom can display promotional content while remaining part of the vehicle control system.
Office Buildings
The DZ-2232 can support employee and visitor vehicle access while providing a visible position for building announcements, brand communication or advertising.
Industrial Parks
For industrial and logistics environments, the barrier helps organize vehicle entry and exit. RS485 and reserved sensor interfaces allow it to form part of an integrated access management system.
Hotels
Hotel parking entrances can use the barrier for vehicle access management while displaying service information, event promotions or advertising to arriving guests.
Media and Property Operations
The advertising panel can be customized for media campaigns or property-managed advertising. This gives the entrance infrastructure an additional communication and revenue-generating role.
Integration in a Parking Access Solution
The DZ-2232 can operate as a standalone remotely controlled barrier or connect to other parking equipment through its available interfaces. In an integrated deployment, it can work with license plate recognition equipment and a parking management system through RS485 communication.
Loop detectors and infrared sensors can be added through the reserved interfaces according to the safety and traffic-control requirements of the site. Traffic-light and boom-position relay outputs can provide additional lane guidance and status feedback.
This flexible interface design allows the barrier to be configured for different entrance layouts without changing its primary role: controlling vehicle passage and providing a large, visible advertising surface.
Why Choose the DZ-2232?
- Combines vehicle access control and advertising display in one device.
- Uses a fourth-generation DC brushless core for smooth operation and reduced brush-related maintenance.
- Supports adjustable opening and closing times from 6 to 20 seconds.
- Accommodates advertising booms from 3 to 6 meters.
- Operates across a stated temperature range of -35°C to +85°C.
- Provides RS485 communication and reserved safety sensor interfaces.
- Allows quick interchange between left- and right-hand operating directions.
- Supports AC 110V/220V, 50/60Hz input for domestic and export applications.
Frequently Asked Questions
What is the available advertising boom length?
The DZ-2232 supports advertising boom lengths from 3 to 6 meters. The appropriate length should be selected according to the lane width and project requirements.
Can the operating speed be adjusted?
Yes. The operating time is adjustable from 6 to 20 seconds.
Can it connect to a license plate recognition system?
Yes. The barrier provides RS485 communication for integration with license plate recognition and parking management systems.
Does the barrier support anti-crush protection?
It includes adjustable obstacle auto-reverse and reserved interfaces for loop detectors and infrared anti-smash sensors.
Is the DZ-2232 suitable for export projects?
Yes. It supports AC 110V/220V at 50/60Hz and is designed for both domestic and export applications.
Can the operating direction be changed?
Yes. The integrated side-mounted core allows quick interchange between left- and right-hand operating directions.
